12
April 14, 2018
Blanking Hour Start.
Hour blanking will start at this hour, on the days set by the
Display Blanking Mode.
If the display blanking mode does not use hours, this setting is not shown.
Blanking Hour End.
Hour blanking will end at this hour, on the days set by the Display
Blanking Mode. If
the display blanking mode does not use hours, this setting is not
shown.
Fade Steps
. This sets how quickly one-digit fades into the next one. You can
also turn off the fade
feature completely. It can be set from 20 (fast) to 200 (very
slow).
Default: 50
.
Scroll Steps.
This sets how quickly each scroll back digit is displayed when we
scroll back from 9 to 0.
You can also turn off the scroll feature completely. It can be
set from 1 (very fast) to 40 (very slow).
Default: 4
.
Back Light.
This sets the mode of the back light.
Default: "Fixed RGB
backlight, no dimming"
•
"Fixed RGB backlight, no dimming". There is a constant color on the back
light, which stays bright all the time, even at night when the display is
dimmed. The Red, Green and Blue intensities are set using the channel
intensities below.
•
"Pulsing RGB backlight, no dimming". This pulses the back light but does
not dim with the display. The Red, Green and Blue intensities are set using
the channel intensities below.
•
"Cycling RGB backlight, no dimming". The back-light cycles through random
mixes of colors but does not dim with the display. The intensities of the
channels are managed by the software.
•
"Fixed RGB backlight, dims with ambient light". There is a constant color on
the back light, which dims as the display is dimmed. The Red, Green and
Blue intensities are set using the channel intensities below
•
"Pulsing RGB backlight, dims with ambient light". This pulses the back light,
which dims as the display is dimmed. The Red, Green and Blue intensities
are set using the channel intensities below.
•
"Cycling RGB backlight, dims with ambient light". The back-light cycles
through random mixes of colors, which dims as the display is dimmed. The
intensities of the channels are managed by the software.
Red Channel Intensity.
Sets the maximum intensity of the red channel back light. This
will be dimmed
according to the display dimming. If you are in cycle mode, this setting
does not do anything. The value can be set from 0 (off) to 15 (bright).
Default: 0
Green Channel Intensity.
Sets the maximum intensity of the green channel back
light. This will be
dimmed according to the display dimming. If you are in cycle mode,
this setting does not do anything. The value can be set from 0 (off) to 15 (bright).
Default: 0
