5
April 14, 2018
Step 3: Configure the WLAN
Now you can log into the Module with a browser and configure it. Open a browser on the
wifi device and enter the URL.
http://192.168.4.1/wlan_config
Don't worry if the browser looks a bit ugly at the moment, it is because we are not able to
access the style sheets from the Internet (because the module doesn't have Internet
access until you configure the WLAN).
Select the network you want the clock to use from the list and enter the password for that
network.
For this example, I have chosen the network “LUCANIA”. Press “Set” once you
are ready. The clock is now on your network. The access point will disengage, and you
will have to log into the clocks assigned IP address on your network to complete the
installation.
