17
April 14, 2018
“07”
flashing
Blanking Hour End
. Hour blanking will end at this hour,
on the days set by the Display Blanking Mode. If the
display blanking mode does not use hours, this setting
is not shown.
Default: 07
“08”
flashing
Anti-Cathode Poisoning night suppression
. (If clock is
equipped with LDR option) The ACP which runs during
the night lights the digits up at full brightness, and
some people might find this disturbing. Using this
setting, you can stop ACP happening when the display
is fully dimmed (e.g. at night)
“1” = don't do ACP
when dimmed
“0” = do ACP
always default: 1
Special Effects Settings
“09”
flashing
USE LDR
. If you disable the LDR, the tubes will always
work at maximum brightness.
“1” = enable
“0” = disable
default: 1
“10”
flashing
Blank Mode.
You can set the tubes, the LEDs or both
the tubes and the LEDs to be blanked when in blanking
mode.
“0” = tubes only
“1” = LEDs only
“2” = tubes and
LEDs
default: 2
“11”
flashing
Fade Speed Slower.
Each short press will make the
fade speed between digits slower
Max: 200
Min: 20
Default: 50
“12”
flashing
Fade Speed Faster.
Each short press will make the fade
speed between digits faster.
Max: 200
Min: 20
Default: 50
“13”
flashing
Scroll-back Speed Slower.
Each short press will make
the “scroll back” speed slower.
Max: 40
Min: 1
Default: 4
“14”
flashing
Scroll-back Speed Faster.
Each short press will make
the “scroll back” speed faster
Max: 40
Min: 1
Default: 4
“15”
flashing
Slots Mode.
You can have the date shown
automatically once per minute for about 5 seconds.
“1” = enable
“0” = disable
default: 1
