19
April 14, 2018
“23”
flashing
PWM On Time Longer.
This setting controls how long
the PWM on pulse is. The CPU sets this value. Contact
factory before adjusting
Max: 50
Min: 500
Default:(set by
cpu)
“24”
flashing
PWM On Time Shorter.
This setting controls how short
the PWM on pulse is. The CPU sets this value. Contact
factory before adjusting
Max: 50
Min: 500
Default:(set by
cpu)
Misc Settings
“25”
flashing
Increase Minimum dim.
This setting allows you to
increase the minimum brightness you want to have
when
the clock is fully dimmed.
Max: 500
Min: 100
Default:200
“26”
flashing
Decrease Minimum dim.
This setting allows you to
decrease the minimum brightness you want to have
when
the clock is fully dimmed.
Max: 500
Min: 100
Default: 100
“27”
flashing
Increase Anti-ghosting.
This setting reduces “ghosting”
(the number on the right shows faintly on the digit on
the
left). This is due to transients when switching
Max: 50
Min: 0
Default: 0
“28”
flashing
Decrease Anti-ghosting.
This setting reduces “ghosting”
(the number on the right shows faintly on the digit on
the
left). This is due to transients when switching.
Max: 50
Min: 0
Default: 0
Information
“29”
flashing
Current case temperature.
Show the current
temperature inside the case (used as part of the
temperature compensation for the clock crystal)
“30”
flashing
Clock version
. Show the clock software version.
Digit Test
. Will roll through all digits on all locations to
check that the display is healthy
