Traxon 160136, Руководство по установке

Страница: 8 / 64

8
Setup Manual - Video Micro Converter
Safety instructions
i
Only use the device in compliance with the environmental conditions
specified and watch the technical characteristics. Otherwise the unit
may be damaged or malfunction will happen.
i Only use original e:cue accessories to power VMC. Other power sup-
plies can damage the unit.
i
VMC DVI ports must not be hot plugged! In larger matrix systems with
multiple VMC and many fixtures, voltage potential differences may oc-
cure and damage the VMC. Always turn off fixture supplies and VMC
before connecting or disconnecting any VMC.
i
To prevent the device from overheating, only operate it in well-ventilat-
ed environment. Ventilation may not be obstructed. Do not install next
to heat emitting sources or in a place subject to direct sunlight.
Device components inside the system can reach high temperatures!
To avoid burns, allow the unit to cool for at least 20 minutes before
unmount or repair.
i
Installation and maintenance of this product must be performed by
individuals who are knowledgeable about the procedures, precautions
and hazards associated with the product.
i
This description relates to firmware version 2.x, please contact Traxon
Technologies for documentation on version 1.x. Do not mix VMCs
with firmware versions 1.x and 2.x in one installation!
i VMC with firmware version 2.x can only be configured with e:cue
Patchelor 5.5 or higher!