Traxon 160136, Руководство по установке

Страница: 18 / 64

18
Setup Manual - Video Micro Converter
Operation elements
The VMC button
Button press Action Display
Feedback
short Used to identify VMC in e:cue Patchelor n/a
2 Sec. Store default LED matrix picture
(i.e. company logo or black screen) “S”
4 Sec. Reset Network Settings
Reset VMC network settings to factory defaults.
“I”
long Exit
Return to normal operation without action
“E”
Status LED
LED Position Description
Power Front Power indicator. Blinking during device bootup,
permanently lid on fully operational unit.
DVI Front Device is converting video to DMX/e:pix, lid when
DVI input signal is valid, a valid patchfile is loaded
and device is in grabbing mode.
DVI In Front Indicates presence of video signal on DVI input.
DVI Out Back Indicates presence of DVI monitor on DVI output.
DMX Back Indicates DMX output mode.
e:pix Back Indicates e:pix output mode.
Status display
Display Description
L o A d
Device is in bootloader mode. Message temporarily occurs dur-
ing firmware upgrade. Please upload firmware again if unit stays
in bootloader mode (i.e. failed upgrade)
5 4 3 2 1 C
Indicates VMC boot process