Traxon 160136, Руководство по установке

Страница: 17 / 64

17
Setup Manual - Video Micro Converter
DMX Channels per
Output Sets the number of DMX channels per output. (1 ... 512).
Please note that you might not be able to achieve a maxi-
mum of 512 DMX channels when using refresh rates near
40Hz. Either adjust refresh setting to 2 or use less output
channels for refresh rates up to 40Hz.
DMX Break Time Sets the length of the break time in DMX protocol.
MAB [us] Sets the mark after break time for the DMX protocol.
Add Stopbits Allows insertion of additional stopbits in the DMX
protocol.
Startup Delay [s] Sets a startup delay after power-up. This allows a wait-
time for the DVI source to hide boot screens etc.
DVI settings
Mapped Pixels Status information. Shows the number of pixels that VMC
is patched to and currently converting to DMX/e:pix.
Source Resolution Shows the resolution of the DVI source in pixels and Hz
as refresh rate.
DVI Group Master Indicates whether VMC is first device in a DVI chain. First
unit defines DMX/e:pix output refresh rate and acts as
synchronization master for all following devices. Please
refer to chapter “Daisy Chaining VMC” for details.
Grid Enables marking of grabbed video areas on VMC output.
Can be used during installation or system setup to
align video to grabbing area. The grid can be disabled
afterwards.
Grid Color Set colour for grid. Useful in multiple VMC installations to
quickly identify grabbing areas of individual units, trans-
parent means half-transparent.
On Signal Loss Show user-defined picture or hold last video frame.
Group ID Group ID, define up to 255 independent VMC groups that
are connected to same network.