Traxon 160136, Руководство по установке

Страница: 16 / 64

16
Setup Manual - Video Micro Converter
Device Basics
Device Name Device name: individual device names may ease identifi-
cation in larger systems.
IP Address Sets devices IP Address for VMC. Factory default is
192.168.123.1.
Subnet Mask Select network subnet for VMC.
MAC Address MAC Address of the device.
Version
Hardware Build Version Hardware build version, readonly.
Software Build Version Software build version, readonly.
FPGA Build Version
FPGA build version, readonly.
Output Settings
Socket Setup For DMX outputs.
Select either
Traxon e:cue or ESTA
Output Protocol Select DMX or e:pix (only VMC e:pix).
Output Intensity Sets the output intensity (0 ... 100%). Can be used to
reduce brightness in dark surroundings without modifying
the source video.
Color Mapping Select various channel color mappings, e. g. RGB , RBG ,
GBR
, default:
RGB
Refresh Sets the e:pix refresh rate divider (1 ... 255). Divider will
reduce e:pix output refresh rate based on the incoming
DVI signal. (i.e. set to 1 to equal DVI video refresh rate, set
to 2 for half DVI refresh rate and so forth).
e:pix Channels per
Output Sets the number of e:pix channels per output. (1 - 2048).
Please note that you might not be able to achieve a
maximum of 2048 channels when using refresh rates
above 40Hz. Either adjust refresh setting to “2” or use
less output channels for refresh rates up to 40Hz (only
VMC e:pix).
e:pix Break Time Set the length of the break time in e:pix protocol (only
VMC e:pix) .