-
10
-
4.2 Inserting the threaded rods (2)
Place your free hand over the three
round nuts in order to prevent them
from falling out and reverse the wood-
en cheek. The side with the colour
sticker now points towards you. Lay
the wooden cheek down before you
in this way. The wooden cheek now
rests on the round nuts. The threaded
rods point upwards.
Take one of the stainless-steel plates. A
colour sticker indicates the side of the
stainless-steel plate that should face
the inner side of the wooden cheek.
Hold the stainless-steel plate in such
a way that the side marked with the
sticker points down. Place the stain-
less-steel plate onto the wooden
cheek, passing the threaded rods
through it. The side of the stain-
less-steel plate that is marked with the
colour sticker now lies on the side of
the wooden cheek that is marked with
a colour sticker.
4.3 Attaching the first stainless-steel
plate
SAFETY INFORMATION
The sides of the wooden cheek and of the stainless-steel plate that are
marked with colour stickers must face each other.
This ensures that the ropes will only touch the rounded edge of the stain-
less-steel plate. Non-compliance with these assembly instructions can result
in increased wear and tear of the ropes.
Содержание BABYSCHWINGER
Страница 1: ... 1 your manual ...