TRAUMSCHWINGER BABYSCHWINGER, Руководство пользователя

Страница: 16 / 32

-
16
-
5.2 Inserting and locking the rope ends
For material and manufacturing-related reasons, the ropes might be twisted or
entangled upon delivery. Before inserting the rope ends in the height-adjustment
mechanism, make sure that the ropes are not twisted or entangled.
Safety information
If the ropes are attached to the height-adjustment mechanism in a twisted or
entangled state, this could result in increased wear and tear of the ropes due
to damage of the rope surface.
Start aligning the ropes without twisting on the left-hand side. Hold the left con-
nection knot with your left hand and lift it until the two ropes at the corners of the
net are slightly stretched. Turn the connection knot in your hand so that the two
ropes that come out of the connection knot are not on top of each other (see the
following two figures).
When the connection knot is in this position, hold the rope pair that comes from
the top of the knot between the thumb and index finger of your right hand (see
next figure).
RIGHT WRONG