-
18
-
6
Suspending the net
This section describes the last steps to assemble your TRAUMSCHWINGER. For
this, you need the net that is connected to the height-adjustment mechanism, the
crossbar and the two lateral bars, the rope bag and a stepladder.
6.1 Suspending the net with the height-adjustment mechanism
6.2 Inserting the crossbar
Attach the carabiner that is connected to the
height-adjustment mechanism to the prepared (or
existing) suitable mount; see chapter 2, Require-
ments.
(In the image to the left, the foot rest sling is
already attached)
Safety information
Regardless of the type of mount, it must reg-
ular be checked for wear and tear and secure
fastening!
One of the included wooden bars is longer than the
other two. This is the crossbar.
Take the crossbar and insert the respective rope pair
in the recesses of the crossbar just above the con-
nection knots. Make sure that the ropes that come out
of the connection knot are not on top of each other
or twisted! If necessary, turn the connection knot in
your hand so that the two ropes run freely to the front
and back (see the two figures on the following page).
Press the rope pair into the recess of the crossbar as
far as they will go.
Содержание BABYSCHWINGER
Страница 1: ... 1 your manual ...