-
21
-
7.1 Inserting the crossbar
Spread out the net in front of you in such a way that the label is located in the top
right corner. One of the included wooden bars is longer than the other two. This is
the crossbar.
Make sure that the ropes that come out of
the connection knot are not on top of each
other or twisted! If necessary, turn the
connection knot in your hand so that the
two ropes run freely to the front and back
(see figure).
Take the crossbar and insert the re-
spective rope pair in the recesses of the
crossbar just above the connection knots
(below the wrapped rope end).
Safety information
If the ropes are on top of each other or twisted, this could result in increased
wear and tear of the ropes due to damage of the rope surface. Do not use
any pointed items to press the rope pair into the recess. This could damage
the rope surface and impair the strength of the ropes.
7.2 Inserting the lateral bars
To make it easier to insert the lateral bars, briefly and forcefully stretch the two
short sides of the cotton net. This will also help to make the net comfortable after
unpacking it. Then hold the ends of the net and pull hard on the respective knot
above net.
RIGHT
WRONG
After stretching the net, take the two
lateral bars and attach them to the two
sides alongside the net
between
the
existing knots above the net. Press the
ropes into the recesses of the lateral bar
as far as they will go.
Содержание BABYSCHWINGER
Страница 1: ... 1 your manual ...