TRAUMSCHWINGER BABYSCHWINGER Скачать руководство пользователя

Страница: 29 / 32

Stainless-steel mount

with slide bearing (optional accessory)

Carefully observe the requirements and security information in these instructions and keep

them for future reference. The installation shall be performed by qualified staff in order to

ensure the required load-bearing capacity. The maximum load is limited to 170kg, with

a maximum slant of 45 degrees. Only suitable for attaching furniture. Not approved for

attaching gymnastic and play equipment. The quality of the material must be suitable for

bearing the load to be suspended with the mount. For details about the "Mount Kit for Con-

crete/Wood", see the back.

As our stainless-steel mount is furnished with an integrated slide bearing, you do not need

to use a separate swivel.

Installation

After making sure that the material will be able to bear the load with the selected mount at

the selected position, you can start with the installation. Hold the stainless-steel against the

desired position and mark one of the three hole centres in the material. Drill the first hole

in the material according to the mount chosen. For the remaining steps of the installation,

screw the mount to the material. Use the remaining two holes as a drill template for drilling

the other holes in the material. Now fasten the mount with the remaining screws. Tighten

all screws with the specified torque. After this step, the mount should be flush with the

material.

Safety precautions:

Make sure that the mount is securely tightened and flush.

Содержание BABYSCHWINGER

































Результаты поиска

Содержание BABYSCHWINGER

Отзывы:

Похожие инструкции для BABYSCHWINGER

Бренды по названию

Популярные бренды

TRAUMSCHWINGER BABYSCHWINGER, Руководство пользователя

Результаты поиска

Содержание BABYSCHWINGER

Отзывы:

Похожие инструкции для BABYSCHWINGER

Бренды по названию

Популярные бренды