Transduction TR-LCD1900-ITX-7, Руководство пользователя

Страница: 81 / 107

3.11 Set Supervisor/User Password
You can set either supervisor or user password, or both
of them. The differences between are:
Supervisor password: can enter and change the
options of the setup menus.
User password: just can only enter but do not have the
right to change the options of the setup menus. When
you select this function, the following message will
appear at the center of the screen to assist you in
creating a password.
Phoenix-Award BIOS CMOS Setup Utility
►
Stand CMOS Features
►
Advanced BIOS Features
►
Advance Chipset Features
►
Integrated Peripherals
►
Power Management
►
PnP/PCI Configuration
►
PC Health Status
Load Fail-Safe Default
Load Optimized Default
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Esc :Quit
↑↓← → ：
Select Item F10:Save & Exit Setup
ENTER PASSWORD:
Type the password, up to eight characters in length, and
press <Enter>. The password typed now will clear any
previously entered password from CMOS memory. You
will be asked to confirm the password. Type the
password again and press <Enter>. You may also press
<Esc> to abort the selection and not enter a password.
To disable a password, just press <Enter> when you are
prompted to enter the password. A message will confirm
the password will be disabled. Once the password is
disabled, the system will boot and you can enter Setup
freely.
Enter Password:
80 TR-LCD1900-ITX-7 User Manual