TransAct BANKjet 1500, Руководство оператора

Страница: 26 / 74

2 2 2 2
Revision E
B
. < 0 " # . < 0 " # . < 0 " # . < 0 " #
Use the following table to decide how much paper you want to remain after paper low sensing has occurred.
TransAct’s expected results are based on paper and paper roll with these specifications. Refer to “Receipt Paper
(one-ply receipt)” on page 44, and “Paper and Core Diameter” on page 44 for paper measurements.
Paper Low Adjustment Settings Approximate Paper
Remaining (in feet)
Paper Roll Diameter
UPPER LIMIT: 3 turns (counter clockwise) 24' 1.420" (36mm)
2 turns (counter clockwise) 22
'
1.375" (34.9mm)
1 turns (counter clockwise) 16’ 1.250" (31.7mm)
FACTORY SETTING 12' 1.175" (29.8mm)
1 turn (clockwise) 7 ' 1.050" (26.6mm)
2 turns (clockwise) 3.5
'
.950" (24.1mm)
LOWER LIMIT: 3 turns (clockwise)
1.25'
.885" (22.5mm)
Table 2 Paper Low Setup