TransAct BANKjet 1500, Руководство оператора

Страница: 61 / 74

2 2 2 2
Revision E
>
Appendix C: Common Operational Tasks
Task Approach
. " . " . " . "
Open the printer’s front paper cover. Insert the new
paper roll so that it unwinds from the bottom and rests
on the top of the front cover and aligns with the paper
stop on the front cover. Close the paper cover. The
paper will load automatically. See “Installing a New
Paper Roll Using Insta-Load”, on page 22.
! .
! . ! .
! .
Press and release the
!((
Button for a single line.
Press and hold the
!((
Button for continuous feed.
$ 9
$ 9 $ 9
$ 9
DO NOT USE ANYTHING OTHER THAN NEW CARTRIDGES
WHEN REPLACING EMPTY CARTRIDGES
Open the printer’s front cover. Take the ink cartridge(s)
out of the carriage system and replace with new
cartridge(s). Press and release the
(+ ")"$ (
Button. See “Installing Ink Cartridges”, on page 20.
" * ) $ 9 < 0 + " * ) $ 9 < 0 + " * ) $ 9 < 0 + " * ) $ 9 < 0 +
% $ 0 $ 9
% $ 0 $ 9 % $ 0 $ 9
% $ 0 $ 9
Press and release the
(+ ")"$ (
Button
immediately after loading the new ink cartridges.
$ 9 $ 9 $ 9 $ 9
Press and release the
(+ ")"$ (
Button 2-3
times. If the cartridge still is not working correctly,
replace the cartridge(s).
. $ 9 < * & . $ 9 < * & . $ 9 < * & . $ 9 < * &
Press and release the
(+ ")"$ (
Button.
) % , ) % , ) % , ) % ,
Follow the directions that print on the configuration
summary receipt after entering Configuration Mode.
& * % & & * % & & * % & & * % &
Press and release the * Button at any time.
(A & % (A & % (A & % (A & %7 7 7 7) , ) , ) , ) ,
Press and release the * Button at any time.
(A % ,
(A % , (A % ,
(A % ,
Press and release the * Button at any time.
) . ) . ) . ) .
Press and release the * Button.
) . !!
) . !! ) . !!
) . !!
Press and release the * Button.
. . . . . . . . $ & % $ & % $ & % $ & %7 7 7 7) , ) , ) , ) ,
1. Press and release the * Button to place the printer
into STANDBY/OFF mode. (The
POWER INDICATOR
LIGHT
will be off.)
2. Press and hold the
(+ ")"$ (
Button.
3. While holding the
(+ ")"$ (
Button,
press and release the * Button.
4. When the red,
ERROR INDICATOR LIGHT
blinks,
release the
(+ ")"$ (
Button.
5. Follow the directions printed on the receipt to
select the desired TEST option.
( % ,
( % , ( % ,
( % ,
1. Unplug the power cord from the printer.
2. Press and hold the
!((
Button and plug the
power cord back into the printer.
3. Continue to hold the
!((
Button until the
ERROR
INDICATOR LIGHT
begins to blink.
4. Release the
!((
Button. A receipt will print. This
Configuration Summary Receipt shows how your
printer is configured. Follow the directions at the
bottom of the receipt to change and save settings.
5. See “Understanding Configuration Mode” on page
32.
Table 14 Using Buttons Quick Reference Table