TransAct BANKjet 1500, Руководство оператора

Страница: 49 / 74

2 2 2 2
Revision E
>:
" 5 " 5 " 5 " 5
Printer Life 10,000,000 print lines
Mean time between failures: (without cartridge): 28,000 hours
Average cartridge life (Average 16 dots/character): 7.0 million characters
Autocutter option (partial cut) : 1 million cuts
Mean time to repair: 15 minutes
Validation Cycles: 1 million cycles
. 0 " # . 0 " # . 0 " # . 0 " #
. 0 ?
. 0 ? . 0 ?
. 0 ?
Supply voltage: 24 Vdc
±
10%
Supply Current: 1.0Amps
. 0 ? . 0 ? . 0 ? . 0 ?
Supply Voltage: 100-240 Vac
Frequency: 50/60 Hz
Supply Current: .5 Amps maximum
. & %
. & % . & %
. & %
Printing method: Thermal ink jet
Cartridge arrangement:
12 nozzle
Printing directions:
Bi-directional, logic seeking
Paper feed pitch: Default - 0.125" (1/8" or 3.175 mm)
Validation Type: Independent
Receipt print zone (maximum):
2.5" (63.5 mm)
Validation print zone:
Refer to “Validation Form Requirements” on page 45.
Characters per Line
Minimum Lines per Second
1
:
:
; =
> 6
Table 8 Print Speed Specifications
1
Print speed is calculated with the 12 x 12 single wide font at 17.3 cpi and 8 lpi spacing. If head maintenance
needs to be done, the print speed will be less.
Earth Ground
+24 Volt Supply
Ground (+24 V dc)