TransAct BANKjet 1500, Руководство оператора

Страница: 44 / 74

2 2 2 2
Revision E
;@
)0 7 " & C D
The two-color ready setup allows the BANKjet to operate as a Single Color printer with the option of reconfiguring
the printer for two-color printing. This reconfiguration can be done at anytime by TransAct or any one of our
certified service technicians.
A printer that is setup with the two-color ready option but has no second cartridge in the right carriage always needs
to have the orange colored, plastic spacer in the right carriage. There is an auto-sense feature that attempts to auto
sense the presence of a second cartridge. This auto-sense will momentarily re-configure the printer for two cartridge
operation. The auto-sense is performed when power is applied to the printer (not with the * Button). If the printer is
power cycled without the second cartridge, the printer will revert back to single cartridge operation. When the
printer has the second cartridge installed, it should be reconfigured through software, or with manual configuration
to be a two cartridge (color) printer. In addition to this, the printer needs the following configuration settings:
Printing Setup Left Cart. Right Cart. Wiper Selecting the configuration menu settings:
See “ Understanding Configuration Mode ” on page 32
for information on how to change configuration settings.
)0 " 9
#
% 3 , ' % 3 , ' % 3 , ' % 3 , '
< %
9 9 9 9
% 3 , ' % 3 , ' % 3 , ' % 3 , '
"
" " " "
Table 6 Two Color Ready Operation-Color Configuration Details
)0 & C0 D
Two-color operation setup allows the BANKjet to operate as a two-color printer. Unlike the two-color ready setup,
the two-color setup does not use the orange colored spacer in the right carriage. Instead, the right carriage holds a
color ink cartridge, and is used along with the desired ink cartridge in the left carriage to produce two-color printing.
The color of the second cartridge should be configured into the BANKjet 1500 printer. The printer should be set to
Red, Green, or Blue. If the desired color is not one of these primary colors, the nearest primary color should be
selected. For example if the desired color is orange, the nearest primary color in the printer configuration is red. A
printer that is setup to print multiple colors needs to have the following configuration settings:
Printing Setup Left Cart. Right Cart. Wiper Selecting the configuration menu settings:
See “
Understanding Configuration Mode
” on page 32
for information on how to change configuration settings.
)0 9 " < % , < % , < % , < % ,
9
"
" , " , " , " ,
"
Table 7 Two Color Operation-Color Configuration Details
* )0 7 & C5 9 & D
A printer that is setup for two-color printing can be reconfigured to print using only a single cartridge. This can be
achieved by resetting the left cartridge color to “BLACK” and the right cartridge color to “COLOR READY” using
the configuration menu. When “COLOR READY” is activated, all printing data will be sent to the left cartridge and
the printer will be able to print using a single cartridge in the left carriage only. When “COLOR READY” is
activated, the orange spacer needs to be re-inserted into the right carriage.