Trane Tracer AH540 Скачать руководство пользователя страница 84 | Manualshive

Страница: 84 / 96

background image

78

CNT-SVX05A-EN

Appendix

FCC

CFR 47, Part 15, Subpart A, Class A

Note: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.

CFR 47, Part 15, Subpart A, Class B

Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

CE radiated emissions
EN55022 Class A

Warning

: This is a Class A product. In a domestic environment this product

may cause radio interference in which case the user may be required to take
adequate measures.

«
...
82
83
84
85
86
...
»

Содержание Tracer AH540

































































































Отзывы:

Нет отзывов

Похожие инструкции для Tracer AH540

Бренд: Eaton Страницы: 50

Бренд: Panasonic Страницы: 12

Бренд: Panasonic Страницы: 10

Бренд: Bang & Olufsen Страницы: 9

Бренд: Bang & Olufsen Страницы: 12

Бренд: Hach Страницы: 86

Бренд: Jabra Страницы: 3

Бренд: MacDon Страницы: 32

Бренд: K&K Страницы: 6

Бренд: Samson Страницы: 78

Бренд: UNISENSE Страницы: 16

Бренд: Xylem Страницы: 48

XP-9 88-IoT Series

Бренд: ICP DAS USA Страницы: 8

Бренд: ICON Страницы: 2

Бренд: ICP DAS USA Страницы: 4

Бренд: IN-COMMAND Страницы: 47

Бренд: SYCLOPE Страницы: 60

Бренд: Sartorius Страницы: 165

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды