manualshive.com logo in svg

Trane S*HF*20-75, Руководство по устранению неисправностей

Поделиться
Скачать
Trane S*HF*20-75 Скачать руководство пользователя страница 116

116

RT-SVP07B-EN

DIAGNOSTICS Menu

Active Diagnostic -- Info

Dirty Recovery Filter               More

Used With: All units
Factory Presets: N/A
Possible Values: [Information Only] 

Heat Fail
Dirty Filter
Dirty Final Filter
Dirty Recovery Filter
Ventilation Override Mode A, B, C, D, E 

Note: The word “More” will only appear if more than one failure 
is occurring. Press the Next key to view the remaining diagnostics 
if any exist.

Note: Pressing the Next key at the last Info Only Diagnostic will 
prompt the following screen…

Log 1       (Viewed)     History  Manual

Supply Air Pres Setpt Failure

Used With: All units
Factory Presets: N/A
Possible Values: Log Number 1-20

Top Middle-Left Field: 

Viewed, Not Viewed

Top Middle-Right Field: 

Active, History

Top Right Field: 

Manual, Auto, Info.

Notes:

1. Any diagnostic listed under the previous screens will be 

displayed here. This screen will show the last 20 diagnostics 
that have occurred with the latest being assigned to “Log 1”, the 
prior being pushed to “Log 2” (and so on) with the last 
diagnostic in the list being removed if beyond the 20th position. 
No diagnostic will be logged consecutively, another diagnostic 
must occur prior to an older diagnostic being re-entered into 
the log.

2. Press the Next key to view any remaining diagnostic history 

items. Pressing the Cancel key, to clear the diagnostic history 
log, will prompt the following screen…

Diagnostic Log Is Password Protected

Please Enter Password:

Used With: All units
Factory Presets: N/A
Possible Values: + (Plus) and - (Minus)

Notes:

1. Press the + (plus) or - (minus) keys to enter the password.
2. Press the ENTER key to confirm this choice. When the correct 

password is entered, the following screen will be displayed…

Active Diagnostics            Manual

Please Wait, Updating Diagnostic Log

Used With: All units
Factory Presets: N/A
Possible Values: Manual, Auto, or Info

OR

Note: If the Cancel key is pressed there are no diagnostics listed 
in the “DIAGNOSTIC LOG”, the following screen will be displayed…

Содержание S*HF*20-75























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды