25
it is not, clean it with a wire, as well as the four holes of the Steam Outlet Pin on
the inside of the lid; look at it again against the light to make sure. When they
are all clean, assemble the Pressure Regulator.
SEALING RING
(SILICONE):
• Remove the sealing ring (silicone).
• Wash with warm water and mild soap.
• Place ring in the lid.
• Check the condition of the silicone sealing ring regularly for wear and
tear and replace when necessary.
• For the Sealing Ring to last longer, we recommend storing your
pressure cooker with the lid inverted on top of the cooker body.
• Special attention should be paid to the cooker’s sealing ring and safety
systems. The sealing ring should fit snugly inside the lid and the lid should
fit properly on the cooker.
For your own safety, use only original Tramontina parts and
accessories.
7. Replacement parts
Always use original Tramontina parts. The use of non-original
components may compromise the product’s operation and cause
accidents. In the event of need for replacement, contact the nearest
Tramontina unit at one of the addresses found on the website
(www.
tramontina.com.br)
or contact the Tramontina Help Desk.
20 cm or 24 cm sealing ring (silicone).
8. Warranty and technical support
Tramontina offers a 1-year warranty against manufacturing defects or
faults, consisting of nine (9) months of contractual warranty and ninety
(90) days of legal warranty, provided that normal usage conditions are
followed and the orientations in this manual are observed.
The warranty will be valid subject to presentation of the fiscal invoice
and use of original parts. If necessary, contact the nearest Tramontina
unit at one of the addresses found on the website
(www.tramontina.
com.br)
or contact the Tramontina Help Desk.
