User Manual
THIS DOCUMENT IS UNCONTROLLED WHEN PRINTED
Page
30
of
34
8.2.
Servicing
Servicing should only be carried out by an approved service technician, directly by the distributor or
factory. It is recommended that servicing be arranged on an annual basis. Annual servicing will
include:
•
Comprehensive product check including seals and internal structure;
•
System diagnostic and cabling; and
•
General parts replacement and internal clean.
8.3.
Records
A standard inspection checklist has been developed as a guide to assist you with your daily
inspection process. It is recommended that you review the inspection checklist and tailor this
appropriately whilst not impeding on warranty conditions.
WARNING
•
Ensure product is off and charging cable disconnected prior to inspection/maintenance.
•
Keep fingers clear of any moving parts and when conducting repairs and maintenance.
•
Avoid using water or other liquids to clean the product externally.
•
Do not use water or liquids to clean the product internally, this will cause damage.
•
Warning to not tamper with any of the circuitry both internally or externally or any of
the mechanical components, this may void the warranty and may increase risk of harm.
•
Boom shaft and billet is hydraulic and considered a crush and entanglement zone, keep
of moving parts and ensure hands, loose items of clothing, jewellery and hair is clear
when in operation.
