User Manual
THIS DOCUMENT IS UNCONTROLLED WHEN PRINTED
Page
20
of
34
7.4.
LED boom light
The LED boom lights provide enhanced visibility of the product and boom arm to attract motorists
attention, this is appropriate in both day and night settings.
STEP 1
–
Unpack the accessory and check components:
•
Check the condition of the accessory to ensure all components have been supplied.
STEP 2
–
Attach accessory to boom:
•
Secure boom arm in vice in upside down position.
•
Ensure the nail located at the base of the boom channel is flush.
•
Use pliers to remove black rubber, if difficult consider using local softening agent to assist.
•
Attach the accessory to the base of the boom arm.
•
Slide LED into the channel at the base of the boom, push all the way along.
STEP 3
–
Connect accessory cable to connection socket:
•
Ensure the product is turned off prior to connecting cable.
•
The connection socket is positioned on the face of the product next to the advisory lights.
•
Connect cable and plug into the connection socket.
•
Ensure plug is pushed in and fully connected.
STEP 4
–
Test operational sequence:
•
Access the control panel using the key and turn the product on.
•
The product will run a self-test, once complete the green power light will illuminate.
•
The accessory will illuminate red if the boom is down and green if the boom is up.
