User Manual
THIS DOCUMENT IS UNCONTROLLED WHEN PRINTED
Page
12
of
34
4.2.
Connection sockets
The product has two connection sockets, one for charging and the other for the solar panel
accessory. These sockets connect to the battery fitted internally.
STEP 1
–
Connecting charging devices.
•
Ensure the product is turned off prior to connecting a charging device.
•
Slide the relevant socket cover open and connect the cable and plug.
•
A blue light will illuminate on the control panel indicating that the battery is charging.
4.3.
Connection ports
The product has four connection ports which have been designed to fit multiple accessories. These
ports are wired to the respective switches.
The port functions are captured in the table below:
Port
Term
Details
SS
Safety Sensor
Sensor prevents boom from coming down if broken.
AS
Activation Sensor
Sensor activates boom (raises) if broken.
L2
Secondary Operation
Secondary accessory operation.
L1
Primary Operation
Primary accessory operation.
STEP 1
–
Connecting to the port.
•
Ensure the product is turned off prior to connecting to a port.
•
Remove the port cover, align the connection pins and connect to the socket.
•
Ensure plug is pushed in and fully connected (do not force plugs).
•
Fit dust caps when port is not in use.
