Trackmaster TMX428, Руководство по обслуживанию

Страница: 44 / 159

Operating Instructions Ch.6 TRACKMASTER
42 TMX428 TMX428CP & TMX58 Service Manual 317-160-406 Rev 4
May 2021
Control Panel Display:
The blue display screen in the center of the console provides information on
how to begin your workout and provides continuous user performance data throughout the workout
session. Additionally, it serves as a user interface allowing optional input of user information when a new
workout begins. The screen will prompt the user to input weight, age, and gender so that the onboard
computer can calculate a more accurate calorie burn and target heart rate. Heart rate measurement is
accessible through the use of the contact grips or by wearing a wireless pulse rate watch or chest strap.
The display screen allows the user to simultaneously monitor: time, speed, incline, distance traveled,
pace, current heart rate, calories burned and METS.
The performance and feedback information provided on the blue display screen are defined as follows:
Time: The elapsed time of your workout session, beginning with the initial movement of the belt and
ending when the stop button is pressed.
Speed: The speed at which the belt is moving. The belt starts at 0.1 MPH and has a top speed of 15.0
MPH Belt speed can be increased or decreased in 0.1 MPH. increments. This feature is capable of
displaying KPH.
Incline: The degree of incline of the walking surface. The starting incline is 0% with a maximum of 25%.
The degree of incline can be increased or decreased in .5% increments.
Distance: The distance traveled in miles during the duration of the workout session, beginning with the
initial movement of the belt and ending when the stop button are pressed. The distance is measured in .1
of a mile. This feature is capable of displaying in Kilometers.
Heart Rate:
The user’s current heart rate calculated in beats per minute when wearing a wireless chest
strap, wireless watch monitor, or by using the contact grips.
Calories: An approximate calculation of cumulative K-CAL expenditure for the exercise session based
on your body weight and the level of difficulty at which you are exercising.
Pace: Displays the number of minutes needed to run one mile or kilometer.
METS: Displays MET level
NOTE: You must attach the Stop Tether lanyard strap to your wrist before pressing any
other buttons on the TRACKMASTER
®
control.
Stop Tether:
This switch is located on the console in the lower right hand portion, just right of center. It
is used in combination with a lanyard and wrist cuff which is to be worn by the user at all times during
the operation of the TRACKMASTER
®
treadmill. The oppos
ite end of the lanyard has a plastic “C”
shaped piece that engages the Stop Tether which must be in place for the machine to run. Simply insert
the clip on the shaft directly behind the red cap on the switch. The TRACKMASTER
®
treadmill is
designed to stop all functions upon activation of the Stop Tether. Operation cannot resume until the
“C”
shaped clip is returned to its operational position.