Trackmaster TMX428, Руководство по обслуживанию

Страница: 115 / 159

TRACKMASTER Ch. 10 Removal and Replacement of Components
317-160-406 Rev 4 TMX428 TMX428CP & TMX58 Service Manual 113
May 2021
Replacing the Power cord
Tools Required
7/16” Open End Wrench or Hex Socket
Approximate time to complete: 10 min
1.
Turn the treadmill’s power switch to the OFF position.
2. Unplug the treadmill from the wall receptacle.
3. Allow treadmill to discharge for 1 minute.
4.
With the 7/16” wrench, remove the 1/4"
-20 bolt, allowing the clamp to be removed
from the front of the treadmill.
5. Unplug the C-19 appliance power cord from the front of the treadmill.
6. Reverse step 1 through step Error! Reference source not found. to reinstall new
ower cord.
Replacing the CE filter
Tools Required
Flat Blade Screwdriver
Pliers or Adjustable Wrench
Grounding Wrist Strap
Approximate time to complete: 30 min
1. Turn treadmill main power switch to the OFF position.
2. Unplug the treadmill plug from the wall receptacle.
3. Allow the treadmill to discharge for 1 minute.
4. Remove the (5) hood-securing bolts.
5. Remove the hood and set it aside.
CAUTION: Use ESD precautions, including wearing a grounding wrist strap that is
connected to an exposed metal connection point on the treadmill chassis.
6. With pliers or an adjustable wrench, hold the 11/32" nuts while removing the two
(2) #8-32 screws with a flathead screwdriver.
7. Remove the quick disconnect wire connection from the inline filter.
Power Cord with C-19
appliance connector
¼”
-20 Bolt
Clamp