6
Operating Manual
BlueTorq-Series
WWW.
TRACKWRENCH.COM
2. General Guidelines
2.1. Changing the Batteries
1. Unscrew the metal end cap at the rear end of the wrench.
2. Remove the two N cell batteries and replace with a new set.
3. Screw the metal end cap back on.
4. Turn on the wrench and check to ensure the date and time are
both set correctly.
Note: Standard & rechargeable AA batteries are both suitable for
use with the BlueTorq-Series. Re-chargeable batteries should be
charged offline with a suitable charger.
2.2. Ratchet
Head
Guidelines
• Store in a cool, dry location.
• Oil frequently to prevent ratchet head from becoming stiff
and
seizing.
• Do not exceed specified torques.
• Do not use external forces on ratchet e.g. a hammer.
• Max Torques: 1/4” = 30 Nm
3/8”
=
135
Nm
1/2”
=
400
Nm
3/4”
=
1.000
Nm
1”
=
2.000
Nm
2.3. Safety
Instructions
The following are a set of general guidelines for using and storing the
wrench that should be adhered to at all times;
• All torque tools are precision instruments and should be
handled with care.
• Do not subject the tool to torque loads in excess of
the model range.
• Do not use the tool to loosen fasteners tightened beyond
maximum tool capacity.
• Using non-linear extensions may affect the accuracy of
the
readings.
• The use of torque extensions will increase the torque applied.
• Do not operate the tool unless it has been powered on and the
display screen can be read clearly.
• Do not drop the tool or subject it to heavy impact blows.
