26
Operating Manual
BlueTorq-Series
WWW.
TRACKWRENCH.COM
4.3.11.
Add a Data Field
1. Select the “Add Data Fields” button on the bottom right of
the main PCFE window.
2. Enter column title and select either “Auto-Fill” or “Manual
Entry” button. If “Auto- Fill” button is selected then the
value entered in “Cell Entry” will be set as default.
3. Hit the save button and the column will be added to the
results table on the far right.
Note
: If enable column is not selected the column will not appear at
all in the PCFE.
Figure 4.3.11.: Adding a default Data field
5. Calibration
For calibration instructions please contact manufacturer.
