11
WWW.
TRACKWRENCH.COM
3.7.1. Torque
1. Press to scroll to Set mode.
2. Press to enter Set mode.
3. If the tool is torque-only, skip to step 4. If the tool has angle
measuring capabilities there will be three options in Set mode;
a. Set Torque.
b. Set Torque & Angle (Auditor Series only Mode).
c. Just Move Preset (Auditor Series only Mode).
The user should select the most relevant option for their application.
4. Press to select set by percentage or set by tolerance.
5. Press to scroll to required preset number i.e. 1 to 99.
6. Press to confirm preset number selected.
7. Press to set nominal value and to confirm.
8. Press to set your low value and to confirm.
9. Press to set your high value and to confirm.
Figure 3.7.1. A: Nominal Preset
Figure 3.7.1. B: Low Preset
Figure 3.7.1. C: High Preset
10. Once the parameters have been confirmed the operator can
find the configured preset within Preset mode. Use to select
Preset mode from the main menu and find the desired preset number.
Figure 3.7.1. D: Set & Preset Functions
