25
WWW.
TRACKWRENCH.COM
4.3.10.
Set a Preset using the PCFE
1. Ensure the Torque Device is connected to the PCFE
software selected using “Select Port” (Figure 2).
2. Select the preset number or location from 1 to 99 you
wish to set.
3. When the pop up window appears fill in required fields
and press “O.K.”.
4. Select ‘Store to Torque Device’. The data is then written to
the Torque Device.
Notes:
• Some series of torque device only have the capability for one
preset to be configured.
• Torque or torque and angle parameters can be set
product
dependent.
Figure 4.3.10.: Setting Presets via the PCFE
