Extending the Safety Program
– Application Examples
TR-Electronic GmbH 2016, All Rights Reserved
Printed in the Federal Republic of Germany
Page 152 of 159
TR - ECE - TI - DGB - 0292 - 01
09/20/2016
In order to execute the manufacturer error block, this is called up in Network 1 of
the
Main (OB1)
block. The
Main (OB1)
block is set to the FBD programming
language. The
Main (OB1)
block is opened in the program editor and selected
by double-clicking the left mouse button in the
Project tree
directory. The
manufacturer error block is dragged from the
Project tree
directory into
Network 1 of the opened program editor by clicking and holding the left mouse
button.
A window opens in which an instance data block must be created for the
manufacturer error block. Select the
Single instance
on the left-hand side of
the
opened
window.
In
the
example
project,
for
Name:
TR_Manufacturer_Error_DB
must be entered. The data block is created by
pressing the OK-button.
