Printed in the Federal Republic of Germany
TR-Electronic GmbH 2016, All Rights Reserved
09/20/2016
TR - ECE - TI - DGB - 0292 - 01
Page 105 of 159
In order for the blocks for the safety program to be generated automatically, fail-
safe must be activated in the F-CPU. To activate fail-safe, select
Fail-safe
in
the
General
tab in the directory tree. The checkbox F-capability must be
activated in the mask under
F-activation
. If not, fail-safe must be activated by
selecting the button
Enable F-activation
.
As the F-CPU has activated
Device replacement without exchangeable
medium
is set by default in the options. For the example it has to be switched off.
To deactivate the setting, select the
General
tab in the directory tree and then
select the directory
PROFINET interface[X1] -> Advanced options ->
Interface options
. In the mask the
Support device replacement
without exchangeable medium
checkbox must be deselected.
