TL-WR941ND
Wireless N Router
Figure 4-15 Wireless Settings
¾
Wireless Network Name -
Enter a value of up to 32 characters. The same name of SSID (Service Set
Identification) must be assigned to all wireless devices in your network. Considering your wireless network
security, the default SSID is set to be TP-LINK (XXXXXX indicates the last unique six numbers of each
Router’s MAC address). This value is case-sensitive. For example,
TEST
is NOT the same as
test
.
¾
Channel -
This field determines which operating frequency will be used. The default channel
is set to
Auto
, so the AP will choose the best channel automatically. It is not necessary to
change the wireless channel unless you notice interference problems with another nearby
access point.
¾
Region
-
Select your region from the pull-down list. This field specifies the region where the
wireless function of the Router can be used. It may be illegal to use the wireless function of
the Router in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
When you select your local region from the pull-down list, click the
Save
button
,
then the
Note Dialog appears. Click
OK
.
Note Dialog
)
Note:
Limited by local law regulations, version for North America does not have region selection option.
-37-
Содержание TL-WR941ND - Wireless Router
