TP-Link TL-WR941ND - Wireless Router Скачать руководство пользователя | Manualshive

Страница: 2 / 113

background image

I

COPYRIGHT & TRADEMARKS

Specifications are subject to change without notice.

is a registered trademark

of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or

registered trademarks of their respective holders.

No part of the specifications may be reproduced in any form or by any means or used to make any

derivative such as translation, transformation, or adaptation without permission from TP-LINK

TECHNOLOGIES CO., LTD. Copyright © 2012 TP-LINK TECHNOLOGIES CO., LTD. All rights

reserved.

http://www.tp-link.com

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

•

Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference that may cause

undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s authority
to operate the equipment.

«
1
2
3
4
...
»

Содержание TL-WR941ND - Wireless Router


















































































































Отзывы:

Нет отзывов

Похожие инструкции для TL-WR941ND - Wireless Router

Бренд: D-Link Страницы: 168

AirPremier DWL-7700AP

Бренд: D-Link Страницы: 30

AirPlus Xtreme G DWL-2000AP

Бренд: D-Link Страницы: 28

StreamBuds Hybrid

Бренд: Mixx Страницы: 17

Бренд: B-Link Страницы: 14

Бренд: Ruckus Wireless Страницы: 4

Бренд: TaoTronics Страницы: 11

UniFi UAP-FlexHD

Бренд: Ubiquiti Страницы: 22

Бренд: Conceptronic Страницы: 8

Бренд: TRENDnet Страницы: 127

ZoneFlex series

Бренд: Ruckus Wireless Страницы: 68

Бренд: Belkin Страницы: 30

Бренд: Kasda Страницы: 32

Бренд: LevelOne Страницы: 31

Бренд: ARGtek Страницы: 14

Бренд: Sitecom Страницы: 54

Бренд: IP-COM Страницы: 15

Бренд: IP-COM Страницы: 63

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды