81
Chapter 4
Configure the Router in Standard Router Mode
¾
To set time automatically:
1. Select your local time zone.
2. Enter the address or domain of the
NTP Server I
or
NTP Server II
.
3. Click
Get GMT
to get time from the Internet if you have connected to the Internet.
4. Click
Save
.
¾
To set Daylight Saving Time:
1. Select
Enable DaylightSaving
.
2. Select the start time from the drop-down list in the
Start
field.
3. Select the end time from the drop-down list in the
End
field.
4. Click
Save
.
Note:
This setting will be used for some time-based functions such as firewall. You must specify your time zone once you
login to the router successfully; otherwise, time-based functions will not take effect.
4. 14. 3. Diagnostic
Diagnostic is used to test the connectivity between the router and the host or other
network devices.
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for
the router.
2. Go to
Advanced
>
System Tools
>
Diagnostic
.
