132
Chapter 5
Con
fi
gure the Router in Hotspot Router Mode
•
Enable TCP-SYN-FLOOD Attack Filtering
-Check the box to enable or disable this
function.
•
TCP-SYN-FLOOD Packets Threshold (5~3600)
- The default value is 50. Enter a value
between 5 ~ 3600. When the number of the current TCP-SYN-FLOOD packets is
beyond the set value, the router will startup the blocking function immediately.
•
Ignore Ping Packet From WAN Port
- The default setting is disabled. If enabled, the
ping packet from the Internet cannot access the router.
•
Forbid Ping Packet From LAN Port
- The default setting is disabled. If enabled, the
ping packet from LAN cannot access the router. This function can be used to defend
against some viruses.
3. Click
Save
.
4. Click
Blocked DoS Host List
to display the DoS host table by blocking.
5. 7. 3. Local Management
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for
the router.
2. Go to
Advanced
>
Security
>
Local Management
, and you can block computers in
LAN from accessing the router.
For example
, if you want to allow PCs with specific MAC addresses to access the router’s
web management page locally from inside the network, please follow the instructions
below:
1 ) Select
Only the PCs listed can browse the built-in web pages to perform
Administrator tasks
.
