4
Chapter 1
Get to Know About Your Router
LED
Status
Indication
(WPS)
On
The LED stays on for 5 minutes when WPS connection is established,
and then goes off.
Blinking
WPS connection is in progress.
Off
No WPS connection is established.
Port and Button Description
Item
Description
Mode Switch
This button is used to switch the operation mode of the router.
WAN/LAN Port
This port functions as a WAN port in Router mode and as a LAN port in Hotspot, Access
Point, Range Extender and Client mode.
Power
This port is used to connect the power adapter.
Reset (Hole)
Use a pin to press and hold this button for 5 seconds to reset the router.
3G/4G USB
This port is used to plug a 3G/4G USB modem or a USB disk into.
(WPS)
Press this button to establish WPS connection.
