TP-Link MR5-WR542G, Руководство пользователя

Страница: 44 / 82

MR5-WR542G 54Mbps Wireless Router User Guide
39
Note : The function won't take effect until the router reboots.
4.7 Forwarding
Figure 4-26 The Forwarding menu
There are four submenus under the Forwarding menu (shown in Figure 4-26): Virtual Servers , Port
Triggering , DMZ and UPnP . Click any of them, and you will be able to configure the corresponding
function. The detailed explanations for each submenu are provided below.
4.7.1 Virtual Servers
Virtual servers can be used for setting up public services on your LAN, such as DNS, Email and FTP. A
virtual server is defined as a service port, and all requests from the Internet to this service port will be
redirected to the computer specified by the server IP. Any PC that was used for a virtual server must
have a static or reserved IP Address because its IP Address may change when using the DHCP
function. You can set up virtual servers on this page, shown in Figure 4-27:
Figure 4-27 Virtual Servers
¾
Service Port - The numbers of External Ports. You can type a service port or a range of service
ports (the format is XXX – YYY, XXX is the start port, YYY is the end port).
¾
IP Address - The IP Address of the PC providing the service application.
¾
Protocol - The protocol used for this application, either TCP , UDP , or All (all protocols supported
by the router).
¾
Status - The status of this entry either Enabled or Disabled .
To setup a virtual server entry:
1. Click the Add New button . (pop-up Figure 4-28)
2. Select the service you want to use from the Common Service Port list. If the Common Service