TP-Link MR5-WR542G Скачать руководство пользователя страница 32

Страница: 32 / 82

MR5-WR542G

54Mbps Wireless Router User Guide

all times, enter 0 in the

Max Idle Time

field. Otherwise, enter the number of minutes you want to

have elapsed before your Internet connection terminates.

Caution

: Sometimes the connection cannot be disconnected although you specify a time to Max

Idle Time, since some applications are visiting the Internet continually in the background.

Connect Automatically -

Connect automatically after the router is disconnected. To use this option,

click the radio button.

Connect Manually -

You can configure the router to make it connect or disconnect manually. After a

specified period of inactivity (

Max Idle Time

), the router will disconnect from your Internet

connection, and you will not be able to re-establish your connection automatically as soon as you

attempt to access the Internet again. To use this option, click the radio button. If you want your

Internet connection to remain active at all times, enter "0" in the

Max Idle Time

field. Otherwise,

enter the number in minutes that you wish to have the Internet connecting last unless a new link is

requested.

Caution

: Sometimes the connection cannot be disconnected although you specify a time to Max Idle

Time, since some applications are visiting the Internet continually in the background.

4.4.3 MAC Clone

You can configure the MAC address of the WAN port on this page, Figure 4-13:

Figure 4-13 MAC Address Clone

Some ISPs require that you register the MAC Address of your adapter, which is connected to your

cable/DSL Modem or Ethernet during installation. Changes are rarely needed here.

WAN MAC Address -

This field displays the current MAC address of the WAN port, which is used

for the WAN port. If your ISP requires that you register the MAC address, please enter the correct

MAC address into this field. The format for the MAC Address is XX-XX-XX-XX-XX-XX (X is any

hexadecimal digit).

Your PC's MAC Address -

This field displays the MAC address of the PC that is managing the

router. If the MAC address is required, you can click the

Clone MAC Address

button and this MAC

address will fill in the

WAN MAC Address

field.

Click

Restore Factory MAC

to restore the MAC address of WAN port to the factory default value.

Содержание MR5-WR542G



















































































Результаты поиска

Содержание MR5-WR542G

Отзывы:

Похожие инструкции для MR5-WR542G

Бренды по названию

Популярные бренды

TP-Link MR5-WR542G, Руководство пользователя

Результаты поиска

Содержание MR5-WR542G

Отзывы:

Похожие инструкции для MR5-WR542G

Бренды по названию

Популярные бренды