TP-Link MR5-WR542G Скачать руководство пользователя страница 30

Страница: 30 / 82

MR5-WR542G

54Mbps Wireless Router User Guide

case-sensitive.

Dynamic IP/ Static IP –

Choose either as you are given by your ISP.

Click the

Connect

button to connect immediately. Click the

Disconnect

button to disconnect

immediately.

Connect on Demand -

You can configure the router to disconnect from your Internet connection

after a specified period of inactivity (

Max Idle Time

). If your Internet connection has been

terminated due to inactivity,

Connect on Demand

enables the router to automatically re-establish

your connection as soon as you attempt to access the Internet again. If you wish to activate

Connect on Demand

, click the radio button. If you want your Internet connection to remain active at

all times, enter 0 in the

Max Idle Time

field. Otherwise, enter the number of minutes you want to

have elapsed before your Internet connection terminates.

Caution

: Sometimes the connection cannot be disconnected although you specify a time to Max

Idle Time, since some applications is visiting the Internet continually in the background.

Connect Automatically -

Connect automatically after the router is disconnected. To use this option,

click the radio button.

Connect Manually -

You can configure the router to make it connect or disconnect manually. After a

specified period of inactivity (

Max Idle Time

), the router will disconnect from your Internet

connection, and you will not be able to re-establish your connection automatically as soon as you

attempt to access the Internet again. To use this option, click the radio button. If you want your

Internet connection to remain active at all times, enter "0" in the

Max Idle Time

field. Otherwise,

enter the number in minutes that you wish to have the Internet connecting last unless a new link is

requested.

Caution

: Sometimes the connection cannot be disconnected although you specify a time to Max Idle

Time, since some applications is visiting the Internet continually in the background.

8. If you choose

PPTP

, you should enter the following parameters (Figure 4-12):

Содержание MR5-WR542G



















































































Результаты поиска

Содержание MR5-WR542G

Отзывы:

Похожие инструкции для MR5-WR542G

Бренды по названию

Популярные бренды

TP-Link MR5-WR542G, Руководство пользователя

Результаты поиска

Содержание MR5-WR542G

Отзывы:

Похожие инструкции для MR5-WR542G

Бренды по названию

Популярные бренды