10
Chapter 2
Connect the Hardware
2.
Connect the Controller to your wired host router’s Ethernet port via an Ethernet
cable as shown above.
3.
Connect a computer to the Controller via an Ethernet cable or wirelessly by using
the SSID (network name) and password printed on the label at the bottom of the
Controller.
2. 3. Connect Your Satellites
W
A
N/LAN
LAN
Reset
ON/OFF
Power
ON/OFF
Power adapter
Satellite
1. Connect your satellites to the power sources with the provided power adapter.
2. Press the power ON/OFF button to turn on the satellite.
3. Verify that the System Status LED is solid orange and the Wireless LED is flashing
green.
System Status LED is orange.
Wireless LED is flashing green.
