TP-Link Archer VR400, Руководство пользователя

Страница: 112 / 119

108
6 ) Click OK .
• For Windows 7/8/8.1/10:
1 ) Right-click the Network icon on the system tray and select
Open Network and
Sharing Center > Change adapter settings .
2 ) Right-click your network connection (wired or wireless) and select Properties .
3 ) Double-click Internet Protocol Version 4 (TCP/IPv4) .
4 ) Select both Obtain an IP address automatically and Obtain DNS server address
automatically , then click OK .
5 ) Click OK again to save your configuration.
• For Windows XP:
1 ) Right-click the Network icon on the system tray and select
Open Network
Connections .
2 ) Right-click your network connection (wired or wireless) and select Properties .
3 ) Double-click Internet Protocol (TCP/IP) .
4 ) Select both Obtain an IP address automatically and Obtain DNS server address
automatically , then click OK .
5 ) Click OK again to save your configuration.
T7. What should I do if I cannot find my wireless network or I cannot
connect the wireless network?
• If you fail to find any wireless network, follow the steps below:
1. Make sure the wireless function is enabled if you’re using a laptop with built-in
wireless adapter. You can refer to the relevant document or contact the laptop
manufacturer.
2. Make sure the wireless adapter driver is installed successfully and the wireless
adapter is enabled. You can refer to the relevant document or contact the wireless
adapter manufacturer.
• If you can find other wireless network except your own, follow the steps below:
1. Check the Wi-Fi LED indicator on your wireless router/modem;
2. Make sure your computer/device is still in range of your router/modem. Move closer
if you are currently too far away.
3. Go to Basic > Wireless page, and check the wireless settings, double-check your
Wireless Name (SSID) is not hidden.
4. Connect to wireless network.