E1. Setting of Towel Loom-related Function Panel
Refer to “0.3 Detailed Explanation of Function Panel” of the Standard Machine “Instruction Manual” for the basic
handling procedure of the function panel.
[1] Towel Screen Setting Method
Touch the [ Map ]
–
[ Towel ] icon to display the screen
shown in the bottom at left.
[1.1] Operation for ground weaving only
Use this mode when not using the terry motion for gaiting.
[ OFF ]
Normal operation
[ ON ]
No terry motion starts even for a pile pattern.
[1.2] Wrong warp path (border only)
Normally set to [ OFF ].
[ OFF ]
Normal wrong warp stop
[ ON ]
Stops for wrong warp if wrong warp is detected in the same color with two picks in succession during
boarder weaving.
[1.3]
Interlock for weft removal
[ OFF ]
When a weft fault occurs at the position where a pick tightens F* pile during pile weaving, the loom
becomes inoperable until the first pile pick is removed.
[ ON ]
If a weft fault occurs at any pick during pile weaving, the loom becomes inoperable until the first pile
pick is removed.
E1. Setting of Towel Loom-related Function Panel
45
