[3] How to Run the Warps and Woven Fabric Through
(1) How to run the gland warps through
Run the warps to a gland warp dropper 2 via a
torsion bar roller 1. Allow them to pass between a
pile warp dropper 3 to reach a heald 11 and a reed
12.
(2) How to run the pile warps through
Run the warps along a deflector roller 4 and via a
shock absorber bar 5 to a pile easing roller 6. Run
them to the heald 11 and reed 12 through the pile
warp dropper 3.
(3) How to run woven fabric
Wind woven fabric on a surface roller 8 via an
expansion bar 7. Wind it on a cross roller 10 by
allowing it to pass over the press roller 9.
A: Gland beam
B: Pile beam
a : Gland yarn
b : Pile yarn
1
．
Surface roller
NOTE
: Danger. Beware of a number of spikes
embedded to the surface of the surface
roller 8. Care should be taken when
working near the surface roller 8.
2
．
Cross roller
Wind woven fabric on to a cross roller 10.
Press it with apress roller 13 to insert the fabric
to the groove.
NOTE
: During the setting, terry motion can be
stopped by selecting texture weaving
mode with the function panel.
M1. Preparation for Setting
8
