[4] Height Adjustment
If the height of torsion back is changed, the height of dropper box also changes.
(1) Loosen a bolt 9 of a dropper box bracket 8 and a nut
11 of an adjust bolt 10.
To lower the height, loosen the adjust bolt 10 and
widen the clearance between the frame.
(2) Loosen a bolt 2.
(3) Loosen a nut 7, and turn an adjust bolt 6 to adjust the
height.
(4) Check that the side A of the back bracket is flush
with the flame 4.
(5) Tighten the bolt 2.
(6) Tighten the nut 7.
(7) Tighten the bolt 9 so as to allow the dropper box
bracket 8 to have the same inclination as before the
adjustment.
(8) Tighten the nut 11 so as to have the adjust bolt 10
make a light contact with the frame 4.
M6. Torsion Back
34
