Toyota AURION 2013, Руководство пользователя, Страница: 93 / 371

71
Driving procedures
WHEN DRIVING
BEFORE STARTING THE ENGINE
1. Check the area around the vehicle before entering it.
2. Check the seat position, seatback angle, seat cushion height, head restraint height,
steering wheel angle and steering column length are all adjusted correctly.
3. Check the inside and outside rear view mirrors are adjusted correctly.
4. Fasten the seatbelts.
STARTING THE ENGINE (STANDARD TYPE IGNITION SWITCH)
Before starting the engine, ensure to follow the instructions in “Before starting the
engine”.
1. Apply the parking brake firmly.
2. Turn off unnecessary lights and accessories.
3. Check the shift lever is in P position.
If you need to restart the engine while the vehicle is moving, move the shift lever to N
position. A starter safety device will prevent the starter from operating if the shift lever
is in any drive position.
4. Depress and hold the brake pedal until driving off.
5. With your foot off the accelerator pedal, crank the engine by turning the key to START.
Release it when the engine starts.
INFORMATION
If the engine will not start, refer to “If your engine will not start” on page 313.
To warm up the engine, drive while accelerating smoothly until the engine coolant
temperature is within normal range.
If the engine stalls, simply restart it, using the correct procedure as above.
CAUTION
When starting the engine
Always start the engine while sitting in the driver’s seat. Do not depress the accelerator
pedal while starting the engine under any circumstances.
Doing so may cause an accident resulting in death or serious injury.
Caution when driving
Do not turn the ignition switch to the LOCK position while driving. If, in an emergency,
you must turn the engine off while the vehicle is moving, turn the ignition switch only
to the ACC position to stop the engine. An accident may result if the engine is stopped
while driving.
Refer to “If your vehicle has to be stopped in an emergency” on page 321.
Not for Reproduction