Toyota AURION 2013 Скачать руководство пользователя страница 215

Страница: 215 / 371

193

Touch-screen audio system

INTERIOR FEATURES

USING THE AUX PORT

This port can be used to connect a portable
audio device and listen to it through the
vehicle’s speakers.

1. Lift the lid.

2. Open the cover and connect the

portable audio device.

3. Touch AUX on the audio source

selection screen.

INFORMATION

Operating portable audio devices connected to the audio system

The volume can be adjusted using the vehicle’s audio controls. All other adjustments
must be made on the portable audio device itself.

When using a portable audio device connected to the power outlet

Noise may occur during playback. Use the power source of the portable audio device.

Not for Reproduction

Содержание AURION 2013




















































































































































































































































































































































































Результаты поиска

Содержание AURION 2013

Отзывы:

Toyota AURION 2013, Руководство пользователя, Страница: 215 / 371

Результаты поиска

Содержание AURION 2013

Отзывы: