Toyota AURION 2013 Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 371

Toyota AURION 2013 Скачать руководство пользователя страница 62

40

Opening and closing the windows and moon roof

BEFORE DRIVING

Opening and closing the windows and moon roof

POWER WINDOWS

The windows can be operated with the power window switch on each door.

• Vehicles with standard type ignition switch–

Turn the ignition switch to the ON position.

• Vehicles with smart entry and start system–

Press the ENGINE START STOP switch to IGNITION ON mode.

Normal operation

The window moves as long as you hold the switch.

1. To close the window, lightly pull the

switch up.

2. To open the window, lightly push the

switch down.

One-touch operation for driver’s door

3. To close the window, pull the switch

up completely and then release it.

4. To open the window, push the switch

down completely and then release it.

• Pushing the switch in the opposite direction will stop window travel partway.

Key off operation

Vehicles with standard type ignition switch–

If both front doors are closed, the power windows can be operated for about 45 seconds
after the ignition switch is turned off. They stop working if either front door is opened.

Vehicles with smart entry and start system–

If both front doors are closed, the power windows can be operated for about 45 seconds
after the ENGINE START STOP switch is turned off. They stop working if either front door
is opened.

Jam protection function for driver’s door

During closing operation, the driver’s window will stop and open about half way if
something gets caught between the window and window frame.
If the window receives a strong impact, this function may work even if nothing is caught.

CAUTION

• The jam protection function does not work if the driver’s window switch is

completely pulled up and held.

• Never try jamming any part of your body to make the jam protection function work

intentionally.

• The jam protection function may not work if something gets caught just before the

window is fully closed.

Not for Reproduction

«
...
60
61
62
63
64
...
»

Содержание AURION 2013




















































































































































































































































































































































































Отзывы:

Нет отзывов