Toyota AURION 2013 Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 371

Toyota AURION 2013 Скачать руководство пользователя страница 53

31

Adjustable components

BEFORE DRIVING

CAUTION

When folding the rear seatbacks down

Observe the following precautions. Failure to do so may result in death or serious injury.

• Do not fold the seatbacks down while driving.
• Stop the vehicle on level ground, set the parking brake and move the shift lever to P

position.

• Do not allow anyone to sit on a folded seatback or in the boot while driving.
• Do not allow children to enter the boot.

When returning the seat to its original position

• Ensure the seatbelt does not get caught between or behind the seats.
• If the seatbelt has been released from its guide, pass the seatbelt back through the

guide. Refer to “Rear seatbelt guide” on page 35.

Seat adjustment

Be careful not to get hands or feet pinched between the rear console box and the rear
seat when folding down the rear seatback.

After returning the seatback to the upright position

Observe the following precautions. Failure to do so may result in death or serious injury.

• Make sure the seatback is securely locked by pushing forward and rearward on the

top of the seat.

• Check the seatbelts are not twisted or caught in the seatback.
• Ensure the seatbelt is passing through its guide.

SEATBELTS

Seatbelt precautions

The seatbelts provided for your vehicle are designed for people of adult size, large enough
to correctly wear them.

CAUTION

General

• Toyota recommends that the driver and all passengers must wear seatbelts

whenever the vehicle is moving. Otherwise, they are much more likely to suffer
serious bodily injury or death during sudden braking or a collision.

• When wearing a seatbelt, always observe the following:

– Each person must wear a separate seatbelt

– Do not recline the seatback any more than needed. In a frontal collision, the

more the seat is reclined, the greater the risk of death or serious injury

– Seatbelts provide maximum protection in a frontal or rear collision when the

driver and passengers are sitting up straight and well back in their seats. If you
are reclined, the lap belt may slide past your hips and apply forces directly to the
abdomen, or your neck may contact the shoulder belt

Not for Reproduction

«
...
51
52
53
54
55
...
»

Содержание AURION 2013




















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды