Toyota A442F, Руководство по ремонту, Страница: 33 / 143

AT-20
AUTOMATIC TRANSMISSION - COMPONENT PARTS REMOVAL
18. REMOVE C
2
Bo B
2
ACCUMULATOR PISTONS AND
SPRINGS
(a) Remove the C
2
accumulator piston and spring by
applying compressed air to the oil hole.
(b) Remove the B
o
accumulator piston together with the
B
2
accumulator piston by applying compressed air to
the oil hole.
(c) Remove the B
o
and B
2
accumulator pistons.
(d) Remove the 0 —ring from the accumulator pistons.
19. REMOVE SOLENOID WIRING
(a) Remove the bolt and the solenoid wiring.
(b) Remove the 0 —ring from it.
20. CHECK THRUST CLEARANCE OF OVERDRIVE
INPUT SHAFT (OVERDRIVE PLANETARY GEAR)
(a) Push the 0 / D input shaft toward the rear of the
transmission by applying a force of 49 —98 N (5—10
kgf, 11.0 —22.0lbf)
(d) Using dial indicator, measure the thrust clearance of
the input shaft.
Standard thrust clearance:
0.40-0.90 mm (0.0157-0.0354 in.)
Maximum thrust clearance:
0.90 mm (0.0354 in.)